Posts for category: Dental Procedures
Implants are highly regarded by both dentists and patients for their versatility and durability. But it’s their life-like appearance that “seals the deal” as the restoration of choice — not only mimicking an individual tooth, but emerging from the gum line and blending indistinguishably with other teeth in color and symmetry.
To achieve this result, we must consider a few factors beforehand, particularly the amount of bone available at the intended implant site. An implant requires a certain amount of bone to properly position it for the most natural crown appearance. The bone present around adjacent teeth can also affect your appearance: in the absence of adequate bone the papillae, triangular shaped gum tissue between teeth, may not regenerate properly between the implant and the natural teeth. This can leave a noticeable void, what dentists call “black hole disease.”
Bone loss is a significant problem particularly after tooth loss. It’s quite possible for you to lose a quarter of the bone’s width in the first year after tooth loss. To avoid this, we often use bone grafting techniques immediately after extraction to lessen bone loss; if it’s already occurred we may be able to use similar reconstructive techniques to rebuild and encourage renewed bone growth. In the end, though, if there remains a significant level of bone loss it may be necessary to consider another option for tooth replacement other than implants.
The thickness of your gum tissue, a genetic trait, can also have an impact on the implant’s ultimate appearance. Thicker gum tissues are generally more resilient and easier to work with surgically. Thinner gum tissues are more susceptible to recession and tend to be more translucent, which could cause the underlying metal implant to be visible. Thus, working with thinner gum tissues requires a more delicate approach when trying to achieve a visually appealing result.
All these factors must be balanced, from implantation to final crown placement. But with careful planning and attention to detail throughout the process, many of these issues can be overcome to produce a satisfying result — a new and appealing smile.
If you would like more information on the aesthetics of dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Matching Teeth & Implants.”
The final emergence of permanent teeth in late adolescence marks the end of a long process beginning in the womb with the formation of our primary or “baby” teeth. Permanent teeth form in a similar way as buds high in the jaw, continuing to grow until the primary teeth ahead of them fall away. The crowns of the new adult teeth eventually break through the gum tissue and emerge (erupt) into view.
At least, that’s normally what should happen; sometimes, though, a tooth may only erupt partially or not at all, a condition known as impaction. The crown remains partially or fully submerged below the gum line, causing the tooth to press against other teeth, potentially damaging them. It can also make periodontal (gum) tissues adjacent to the area more susceptible to disease. Wisdom teeth are especially prone to this kind of impaction, to the extent they’re often surgically removed (extracted) to avoid future problems to adjacent teeth or the bite.
Upper canines (the “eye teeth” normally located directly below the eyes) are also subject to impaction. But because of their highly visible position, extracting them could have an adverse impact on the patient’s smile. In this case, we often attempt instead to expose and ultimately save the tooth.
Before taking any action, however, an orthodontic examination is conducted first to pinpoint the exact position of the impacted tooth and determine how that position might affect moving teeth into a more desired alignment. If we find the impacted canine is in a workable position, the next step is to surgically uncover the tooth from the gum tissue (a minor procedure usually performed by an oral surgeon or periodontist). Once exposed, an orthodontic bracket with a small attached gold chain is bonded to the tooth. The gums are then sutured back into place with the chain exposed and allowed to heal.
At some future point an orthodontist will attach the chain to orthodontic hardware that will pull the impacted tooth into proper position over several months. As a result, the upper canine becomes “un-impacted”; the dangers to surrounding teeth and tissues are also reduced. And, just as important, we can preserve the tooth and with orthodontics achieve an attractive, normal smile.
If you would like more information on the effects and treatment of impacted teeth, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Exposing Impacted Canines.”
If you have discolored teeth, the cause is often staining on the enamel surfaces from foods, beverages, or smoking. But tooth discoloration may also originate deep within the root of a tooth. Sometimes this happens to a tooth that had to have earlier root canal treatment because of injury or decay.
In such cases the living pulp tissue and its blood vessels and nerves had to be removed from the root canals, resulting in the death of the dentin layer, which makes up most of the tooth's body. Over time this caused the dentin to darken. The color may come from remains of blood that was left in the tissue, or from filling materials left in the root canal that are showing through.
Since these stains are caused internally (intrinsic) and not on the outside of the tooth (extrinsic) they must be whitened from the inside. This is usually done by putting a bleaching agent into the empty chamber from which the pulp was removed. Usually the bleaching agent is a substance called sodium perborate.
When it is mixed with a solution of hydrogen peroxide, sodium perborate slowly bleaches the color from the tooth's internal material. It is considered to be safe and reliable for this use.
The work begins by taking x-ray images to make sure that the root canal is correctly sealed and the bone is healthy. After this, we will make a small hole in the back of the tooth through which the root canal space will be cleaned. The root canal space will be sealed and the bleach will be applied in a putty-like form and sealed off from the rest of your mouth. Every few days this procedure will be repeated until the bleaching reaches the desired level.
At this point a tooth-colored composite resin will be used to seal the small hole that was made in the dentin to insert the bleach. After the tooth has reached the level of whiteness that matches it to your other teeth, veneers or crowns must sometimes be used to repair the surface if it is chipped or misshapen, for example.
Contact us today to schedule an appointment to discuss your questions about whitening internally discolored teeth. You can also learn more by reading the Dear Doctor magazine article “Whitening Traumatized Teeth.”
Some patients who wear dentures face a kind of Catch-22: their denture fit may have loosened and become uncomfortable over time due to continued bone loss, yet the same bone loss prevents them from obtaining dental implants, a superior tooth replacement system to dentures.
But there may be a solution to this dilemma that combines the stability of implants with a removable denture. A set of smaller diameter implants — “mini-implants” — can support a removable denture with less bone than required by a conventional implant.
Like all living tissue, bone has a life cycle: after a period of growth, the older bone dissolves and is absorbed by the body, a process known as resorption. The forces generated when we bite or chew are transmitted by the teeth to the jawbones, which stimulates new bone formation to replace the resorbed bone. When the teeth are lost, however, the stimulation is lost too; without it, resorption will eventually outpace bone growth and repair, causing the bone mass to shrink.
Removable dentures also can’t supply the missing stimulation — bone loss continues as if the dentures weren’t there; and due to the compressive forces of a denture, bone loss accelerates. As the jawbone structure used to originally form the denture’s fit eventually shrinks, the denture becomes loose and difficult to wear. It’s possible to adjust to the new jaw contours by relining the dentures with new material or creating a new set of dentures that match the current bone mass. Without adequate bone, fixed crowns or bridges anchored by conventional implants may also be out of the picture.
On the other hand, mini-implants with their smaller diameter need less bone than the traditional implant. A few strategically placed within the jaw are strong and stable enough to support a removable denture. One other advantage: these mini-implants can be installed in one visit with local anesthesia and usually without the need for incisions or stitches.
If you would like more information on dentures supported by mini-implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The ‘Great’ Mini-Implant.”
Modern restorations for severely damaged or missing teeth are truly remarkable. Although the type of restoration may differ — dental implant, bridge, or veneer — the end result is a life-like facsimile that matches the shape and color of your natural teeth.
To achieve this result, though, the new crown or veneer requires fabrication in a dental laboratory, a meticulous process that may take a few weeks. In the interim, we often install temporary crowns. These help in a number of ways: because we’ve prepared the teeth for final restoration by removing some of the tooth structure, the temporary crown protects and stabilizes the teeth, reduces sensitivity and helps maintain gum health. Temporary crowns also enable the patient to present a more natural smile while waiting for the permanent restoration.
Temporary crowns are typically manufactured to fit a wide range of patients, similar to an “off-the-rack” suit from a clothing store. In recent years, though, customized “tailored” temporary crowns designed specifically for an individual patient have grown in popularity among dental professionals as well as patients.
In creating a customized temporary crown, we first perform a smile analysis similar to one used for a permanent restoration. After a careful assessment of your mouth, we would then make recommendations about the elements to include in the temporary crown, including shape and color. We would also factor in your desires and concerns into the final design. Working together with the dental laboratory, we would then have the temporary crowns produced and ready to apply as soon as we complete the preparatory work.
Customized temporary crowns also serve another important purpose as a kind of “dress rehearsal” for the permanent restoration. This gives you an opportunity to “try out” the smile you’ll have with the permanent restoration in your daily life. We can then use your experience to make adjustments to the permanent crowns before final production.
While customized temporary crowns involve more effort and expense than the traditional, the benefits are worth the added cost, especially if you’re involved with an extensive “smile makeover” procedure. Not only will you look better while your permanent restoration is under construction, your temporary look will give you added confidence that your future smile is right for you.
If you would like more information on temporary and permanent dental restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Concepts of Temporary Restorations.”